»Latch capacity 2,000 cards
»Type of cards (key fobs) Philips Mifare®, 13.56 MHz
»Information card identifier (UID)»Reading range typically 3 cm
»LED signaling devices + buzzer
»OC lock control, polarization adjustable
»NO output button, shorted to ground
»NO or NC opening sensor, shorted to ground
»12V DC / 60mA power supply
»Working temperature -30 ° C ... + 70 ° C
»Dimensions 50 × 105 × 14 mm
»Weight 100g»Available colors light gray, black, lava
General characteristics
The MM-Z50 RFID lock is an autonomous device. It is used to control electromagnetic locks and jumpers, gates, turnstiles, etc. The lock has a capacity of 2,000 cards. When entering authorized cards into the lock they are automatically grouped in order to easily delete lost cards. The lock reader reads the ID (UID) of Philips Mifare® cards with a standard length of 4 bytes and a length of 7 bytes (characteristic for Ultralight and DESFire cards). Cards (pendants) of this type are commonly used as city cards (eg public transport tickets) or student ID cards, which can additionally be used as identifiers in access control systems. Programming the lock Programming and configuration of the MM-Z50 lock is done using the MASTER cards attached to it. You can use them: add and delete cards authorized to lock the lock opening time (from 1 to 60 sec.) set the polarity of the control output deadlock. change the MASTER cards. Each lock has factory-fitted two MASTER cards and three cards that can be authorized to open the lock. Mechanical properties The lock is made in a durable, aesthetic ABS housing in black or light gray. All electronic components are flooded with varmane mass, which makes the castle resistant to weather conditions (IP65). It can be installed both inside and outside the building. The appropriate design of the lock allows it to be placed directly on the wall surface, underlay signs designed according to the interior design and on the reader's recess directly into the gypsum wall, aluminum profile or machine casing. The technology used makes it possible to mount the MM-Z50 lock directly on a metal surface without significantly losing the reading range of the cards. The exact method of installing the lock is shown in the catalog card of the lock Application As a standard, the MM-Z50 lock is used to secure protected rooms, which can be accessed by a small number of people. However, due to the use of group card writing in it, it can be successfully used to restrict access to buildings, housing estates, parking lots, etc. The castle is also a perfect complement to the access control system and bibinet work time registration.
(2).jpg)
